A facile pathway to prepare molybdenum boride powder from molybdenum and boron carbide

Molybdenum boride is an ideal hard and wear-resistant material. In this study, a new method is proposed for preparing molybdenum boride, by which Mo first reacts with B₄C to generate the mixture of molybdenum boride and C, and then the product is decarburized by molten Ca to generate CaC₂. Pure molybdenum boride could be obtained after acid leaching to remove the by-product CaC₂. According to the experimental and thermodynamic calculation results, it is concluded that the single-phase MoB could be successfully prepared, while Mo₂B, Mo₂B₅, and MoB₄ could not be synthesized by this method. Moreover, it was found that the particle size of finally prepared MoB is determined by particle size of raw Mo powder. The residual carbon content of the product could be decreased to 0.10 wt% after first reaction at 1673 K for 6 hours and then decarburization reaction at 1673 K for 6 hours.     

Developing conductive immiscible polystyrene/polypropylene blends with a percolated conducting polyaniline/polyamide filler by tuning its specific interactions with the styrene-based triblock compatibilizer grafted with maleic anhydride

An approach to induce conductivity in immiscible polystyrene/polypropylene (PS/PP) blends is described using a percolated conducting polyaniline/polyamide (PANI/PA) filler combined with a polystyrene-block-poly(ethylene-ran-butylene)-block-polystyrene-graft-maleic anhydride compatibilizer. The approach is based on the ability of the compatibilizer to concomitantly stabilize the cocontinuous morphology and to improve the state of dispersion of the PANI/PA filler. Selective localization of PANI/PA in the PS phase with improved filler dispersion is achieved with the optimal master batch (MB) preparation technique followed by its optimized sequence addition to the blend components. This results in an increase in the dc conductivity by six decades as compared with that of the neat compatibilized blend at an effective 4.8-wt % PANI concentration. An investigation of the effect of functionality and concentration of the filler and the compatibilizer on the filler connectivity in the blend is performed. The prevailing specific interactions are analyzed by Fourier transform infrared spectroscopy and thermogravimetric analysis of the MBs. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48433.     

Characteristics of pigments,modification, and their functionalities

Novel treatments of pigments with inorganic materials have tremendous industrial and commercial prospects. Specific treatment of pigment has a marked effect on its behavior during application. The treatment allows a broad modification of the surface characteristics of pigment particles which leads to improved functionalities. Surface modification of pigments is achieved via coating, polymerization with modifying reagent, treatment with derivatives or polymers, which alter either the optical, conductivity or dispersibility during processing and application. These and many other distinguishing factors that affect the characteristics of pigments such as the class, crystal structure, particle morphology, particle size, hiding power, pigment volume concentration, surface character, and surface treatment have been reviewed. Various organic pigments such as those from fungus and bacteria, and the various families of pigment types such as metallic pigment, light interference, and diffractive pigments which presents decorative quality such as leafing, nonleafing, pearlscent, and Fabry‐Perot effects on substrates have also been reviewed in addition to those from inorganic sources with emphasis on the structure and physiochemical modifications using metal and nonmetal Ions.     

水泵转子径向圆跳动检测数据修正

针对应用千分表和电涡流传感器进行水泵转子径向圆跳动检测时,检测结果出现正弦变化规律的现象,分析了安装偏心误差对检测结果的影响原理,建立了相应的数学模型.运用最小二乘拟合法计算出变化曲线的幅值及初相位,从而消除偏心误差实现误差分离.结果表明,当将所提方法应用在水泵转子径向圆跳动检测的工程实践中时,可以有效消除安装偏心引起的误差,从而提高检测精确度.拟合平方和误差约为0. 000 9,所提方法可以广泛应用于轴类工件的检测实践.     

基于时空的弱点状运动目标检测技术

如何在复杂背景下持续有效地检测目标位置,一直是研究者们需要面对的主要挑战。本文在研究红外点状移动目标特征的基础上,根据目标无纹理,无形状的特性,提出一种改进的形态学目标增强算法,并利用目标连续时空不变性检测目标。首先,建立多尺度的图像金字塔,在每层上采用改进的形态学算法快速、粗糙定位小目标。然后进一步的根据目标在时空上的位置相关性,提出基于目标运动特征分析的精确检测方法。得到精确稳定的检测结果。最后实验结果表明与经典的形态学检测算法及其他算法相比,该技术能更有效地检测弱小目标,具有更高的鲁棒性。     

Spores morphology of the family Pteridaceae from Shandong Province,China

In this article, we explored systematically the spore morphology of Pteridaceae by observation of the species distributed in Shandong Province using scanning electron microscopy (SEM). The results showed that the spore morphology of all the species in the family is tetrahedral and trilete. The characters of spore ornamentation are intraspecies stable, but significantly different among species and genera. Spore morphology is significant in exploring the phylogenetic relationships of Pteridaceae as well as in generic and specific delimitations.     

Engineering Morphologies of Cobalt Pyrophosphates Nanostructures toward Greatly Enhanced Electrocatalytic Performance of Oxygen Evolution Reaction

Herein, a surfactant‐ and additive‐free strategy is developed for morphology‐controllable synthesis of cobalt pyrophosphate (CoPPi) nanostructures by tuning the concentration and ratio of the precursor solutions of Na₄P₂O₇ and Co(CH₃COO)₂. A series of CoPPi nanostructures including nanowires, nanobelts, nanoleaves, and nanorhombuses are prepared and exhibit very promising electrocatalytic properties toward the oxygen evolution reaction (OER). Acting as both reactant and pseudo‐surfactant, the existence of excess Na₄P₂O₇ is essential to synthesize CoPPi nanostructures for unique morphologies. Among all CoPPi nanostructures, the CoPPi nanowires catalyst renders the best catalytic performance for OER in alkaline media, achieving a low Tafel slope of 54.1 mV dec⁻¹, a small overpotential of 359 mV at 10 mA cm⁻², and superior stability. The electrocatalytic activities of CoPPi nanowires outperform the most reported non‐noble metal based catalysts, even better than the benchmark Ir/C (20%) catalyst. The reported synthesis of CoPPi gives guidance for morphology control of transition metal pyrophosphate based nanostructures for a high‐performance inexpensive material to replace the noble metal‐based OER catalysts.     

Adhesion between oppositely charged polyelectrolytes

The adhesion between a grafted polyelectrolyte layer (brush) and a gel of an oppositely charged polyelectrolyte has been measured as a function of applied pressure, and the interface has been traced using neutron reflectometry. The interface (in aqueous medium at pH 6) between the (polycationic) brush and the (polyanionic) gel has a limited pressure dependence, with a small amount of deformation of the interface at the brush–gel contact. Brushes with a dry thickness of up to 13 nm exhibit weak adhesion (measured using a mechanical force tester) with an adhesive failure when the gel is detached. Thicker brushes result in the gel exhibiting cohesive failure. Reversing the geometry, whereby a polycationic brush is replaced with a polyanion and the polyanionic gel is replaced with a polycation, reveals that the pH dependence of the adhesion is moderately symmetric about pH 6, but that the maximum force required to separate the polycation gel from the polyanion brush over the range of pH is greater than that for the polycation brush and polyanion gel. The polyanion used is poly(methacrylic acid) (PMAA) and polycations of poly[2-(diethylamino)ethyl methacrylate] (PDEAEMA) and poly[2-(dimethylamino)ethyl methacrylate] (PDMAEMA) were used.     

A multiobjective integrated multiproject scheduling and multiskilled workforce assignment model considering learning effect under uncertainty

Today, organizations try to decline academically expenses using humans and resources in addition to rising managers and operators' satisfaction. Meantime, a very important step in the process of decision is the assignment of human resources, particularly in connection with research and development (R&D) projects in which the system is highly dependent on the capabilities of human resources. In this study, we tried all the assumptions that come true in the real world, considered a model for applied R&D projects to reduce costs and increase the efficiency of projects. Therefore, an integrated multiproject scheduling and multiskill human resource assignment model under uncertainty has developed for R&D projects. Furthermore, it is assumed that the activity processing time is related to human resources assignment that means the learning effect is considered. To demonstrate the proposed model efficiency, the various dimensions instance problem was solved accurately and efficiently in GAMS software, and the results have been reported. In addition, the proposed model is validated through the input parameter sensitivity analysis. The results indicate a suitable performance of the proposed fuzzy mathematical programming model is due to the complexity of the problem.     

工艺参数对6061-T6铝合金真空扩散焊接接头形貌和性能的影响

在不同工艺参数下对化学清洗去除表面氧化膜的6061-T6铝合金进行真空扩散焊接,研究了焊接温度(500~560℃)、焊接压力(1.0~5.0MPa)和保温时间(0.5~3h)对焊接接头界面形貌和剪切强度的影响,得到了优化工艺参数。结果表明:随着焊接温度的升高、焊接压力的增大和保温时间的延长,接头焊缝变窄并最终消失,剪切强度和焊合率增大;但当保温时间延长到3h时,焊缝附近晶粒发生粗化,导致剪切强度降低,且接头发生较大变形;不同工艺参数下接头的剪切断裂形式均为脆性断裂;较优的真空扩散焊接工艺参数为焊接温度540℃、保温时间2h、焊接压力4.0MPa。